RMZ  4000
Frame assembly centre

home / product a to z / R
The innovative and highly efficient hardware drilling and screw driving station for frame hinges and pivots. Work quickly and accurately: this machine enables an amazing productivity boost in window manufacturing. Thanks to the easy handling and ergonomically designed work sequence, drilling, assembly, and screwing of the tilt/turn hinges can be performed by a single operator. Due to the movable stop system, the time-consuming drilling of locating and screw holes with a template can be omitted. The unit can be rotated by 90° for machining multi-sash frames. The adjusting device can be positioned in the Y-direction using grid dimensions for drilling pivot bolts into multi-sash frames. The hinges and pivots are screwed to the closed frame by the vertical screwing feed unit which is manually moveable on moving carrier plates. The unit is equipped with an automatic screw infeed, a screwdriver turbine for screwing self drilling screws, and a pneumatic screwing depth stop. Pneumatic frame clamping and positioning device can be moved beyond table centre. Frame rebate dimensions from 360 to 3.400 mm. Two pneumatically lowerable rebate stops with revolver for up to four different frame depths. Laser unit shows the screw driving position.
Caractéristiques techniques arrow_drop_down
CARACTÉRISTIQUES 
Longueur de la table (mm)
4.040
Largeur de la table (mm)
1.700
Longueur totale (mm)
4.220
Largeur totale (mm)
2.010
Hauteur (mm)
1.720
Hauteur de la table réglable (mm)
950 ÷ 1.000
Dimensions minimales du châssis (mm)
560 x 200
Dimensions maximales du châssis (mm)
3.800 x 1.700
Hauteur minimale du profil (mm)
54
Hauteur maximale du profil (mm)
110
Poids (kg)
650
Pression air de service (bar)
7
Puissance de connexion env. (à 2 825 tours/min) (kW)
1,1
Tête à 6 broches
 
Tête à 2 broches
 
DIMENSIONS DE LA VIS 
Diamètre de la tête (mm)
5,0 ÷ 9,0
Diamètre de la tige (mm)
3,5 ÷ 4,5
Longueur env. (mm)
10,0 ÷ 35,0
CONSOMMATION D'AIR 
Unité de vissage env. (l/min.)
250
Étau env. (l/min.)
40
Inclus       
Disponible
Supports

Support de table à glissières PVC

RMZ 4000 Supports Someco
RMZ 4000 Butées de pliage Someco
Butées de pliage

Deux butées de pliage abaissables pneumatiques à révolver pour jusqu'à quatre profondeurs de cadre possibles

Unité de vissage

L'unité est équipée d'une avance automatique des vis, d'une turbine de vissage pour le vissage des vis autoperforantes et d'un arrêt pneumatique de la profondeur de vissage. Dispositif laser d'affichage de la position de vissage

RMZ 4000 Unité de vissage Someco
RMZ 4000 Outil d'avancée des vis Someco
Outil d'avancée des vis

Visseuse à avance automatique des vis

Système de butée

Le système de butée déplaçable évite l'opération lourde de perçage des trous de logement et de vissage avec un gabarit

RMZ 4000 Système de butée Someco
RMZ 4000 Tête de perçage Someco
Tête de perçage (Optionnel)

Equipement possible avec tête de perçage à 2 ou 6 broches

Caractéristiques techniques arrow_drop_down
  • and pivots
  • Work quickly and accurately - this machine enables an amazing productivity boost in window manufacturing
  • Thanks to the easy handling and ergonomically designed work sequence, drilling, assembly, and screwing of the tilt/turn hinges can be performed by a single operator.
  • Due to the movable stop system, the time-consuming drilling of locating and screw holes with a template can be omitted
  • The unit can be rotated by 90° for machining multi-sash frames
  • The adjusting device can be positioned in the Y-direction using grid dimensions for drilling pivot bolts into multi-sash frames.
  • The hinges and pivots are screwed to the closed frame by the vertical screwing feed unit which is manually moveable on moving carrier plates.
  • The unit is equipped with an automatic screw infeed, a screwdriver turbine for screwing self drilling screws, and a pneumatic screwing depth stop
  • Pneumatic frame clamping and positioning device can be moved beyond table centre
  • Frame rebate dimensions from 360 to 3,400 mm
  • Two pneumatically lowerable rebate stops with revolver for up to four different frame depths
  • Laser unit shows the screw driving position 
  • Table length 4,040 mm
  • Table width 1,700 mm
  • Total length 4,220 mm
  • Total width 2,010 mm
  • Height 1,720 mm
  • Table height adjustable 950 - 1,050 mm
  • Frame dimension min. 560 x 200 mm
  • Frame dimension max. 3,800 x 1,700 mm
  • Min. profile height 54 mm
  • Max. profile height 110 mm
  • Weight 650 kg
  • Compressed air supply 7 bar
  • Air consumption:
    •     Screw driving unit approx. 250 l/min.
    •     Clamping unit approx. 40 l/min.

     

  • Screw dimensions:
    •     Head diameters 5.0 - 9.0 mm
    •     Shank diameters 3.5 - 4.5 mm
    •     Length approx. 10.0 - 35.0 mm

     

  • Power supply 230/400 V, 3~, 50 Hz
  • Motor power of 1.1 kW at 2,825 rpm

Others Products

RF 1000 Someco
RF
  
1000
RFR 10 Someco
RFR
  
10
RFR 10/01 Someco
RFR
  
10/01
RFR 10/02 Someco
RFR
  
10/02
RMT 1400 Someco
RMT
  
1400