Maximum working speeds with the highest quality are delivered by five cutting units. Automatic cutting centre with five built-in cutting units for cutting profiles to length for window and door manufacturing. Work sequence as needed, either from the left towards the right or the reverse. Infeed with motorised, continuously adjustable gripper. Lifting function for gap-free loading of the feed magazine. Profiles are guided on rollers to ensure gentle treatment of the profile and protective film. Optimised length cutting with no processing waste. Internal gripper avoids damaging the profiles. Integrated measuring sensors for residual piece detection. Notch cuts possible on both sides. Pointed cuts are possible. Outfeed for parts via discharge table. Industrial PC with Windows operating system.

Technical data arrow_drop_down
AXIS TRAVEL 
Y AXIS (transversal) (mm)
370
Z AXIS (vertical) (mm)
270
X AXIS (bar positioning) (mm)
6.500
Y1 AXIS (gripper transversal positioning) (mm)
130
Z1 AXIS (gripper vertical positioning) (mm)
145
A1 AXIS (pliers rotation)
280°
MACHINABLE CUTTING ANGLES 
Fixed cutting angle frontal
45° / 90° / 135°
Fixed cutting angle backside
45° / 135°
LOADING UNIT: PROFILE POSITIONING 
Workpiece reference stop near the working unit
 
Maximum loadable length (mm)
6.500
Belt loading magazine for 10 profiles with a length varying from 500 mm to 6.500 mm
 
Electronically controlled 0 - 360° collet rotation (C1 axis)
 
Minimum machinable profile section W x H (mm)
30 x 30
Maximum profile height W x H (mm)
135 x 205
WORKPIECE LOCKING 
Automatic fixed clamping system before machining area
 
Automatic fixed clamping system after machining area
 
Clamping system standard, high 20 mm
 
Clamping system for profile adapted to profile system
 
FUNCTIONS 
Label printer
 
Rotary axis gripper
 
CUTTING MOTORS (MANUAL CHANGE) 
Maximum power rating in S6 (kW)
4
Maximum speed (r.p.m.)
2.850
Air cooling
 
Blade diameter (mm)
550
Number of motors
5
Fixed cutting angle frontal
45° / 90° / 135°
Fixed cutting angle backside
45° / 135°
CUTTING DIAGRAM 
SUPPORT BASE 
Monolithic in electrowelded and standardised steel
 
UNLOADING UNIT 
Unloading table with a pneumatic pusher for workpieces of up to 4000 mm
 
Belt magazine unloading depth (mm)
1.900
ELECTRIC CABINET COOLING 
Electrical cabinet with air conditioner for operating temperature < 45 °C
 
Electrical panel and CN conditioner for operating temperatures < 50°C
 
Included       
Available

Other Products