SBZ 608
A fast downstream centre for reinforcement screw driving, drilling and routing cut-to-length profiles for window, door and curtain wall manufacturing with and without steel reinforcement. Portal design for high profile cross-sections and process-optimised throughput.
AXIS TRAVEL
Y AXIS (cross) (mm)
370
Z AXIS (vertical) (mm)
270
X AXIS (bar positioning) (mm)
5.620
Y1 AXIS (cross gripper positioning) (mm)
130
Z1 AXIS (vertical gripper positioning) (mm)
145
A1 AXIS (gripper rotation)
280°
LOADING UNIT: PROFILE POSITIONING
Workpiece reference stop near the working unit
Maximum loadable length (mm)
4.000
Belt loading magazine for 14 profiles with a length varying from 350 mm to 4.000 mm, max. weight 40 kg
Loading feeder with 2 controlled axes for workpieces of up to 4.000 mm with gripper
Electronically controlled 0 - 180° collet rotation (C1 axis)
Minimum machinable profile section - W x H (mm)
30 x 30
ELECTROSPINDLES FOR PVC MILLING (MANUAL CHANGE)
Maximum power in S6 (kW)
0,75
Maximum speed (rpm)
16.300
Maximum diameter (mm)
12
ELECTROSPINDLES FOR HANDLE DRILLING (MANUAL CHANGE)
Maximum power in S6 (kW)
1,6
Maximum speed (rpm)
2.456
Maximum diameter for 3-spindle aggregate (mm max.)
12 / 14 / 12
ELECTROSPINDLES FOR SMALL DIAMETER PVC & STEEL (MANUAL CHANGE) OPTIONAL
Maximum power in S6 (kW)
1,2
Maximum speed (rpm)
9.820
Maximum diameter (mm)
12
ELECTROSPINDLES FOR END MILLING (MANUAL CHANGE) OPTIONAL
Maximum power in S6 (kW)
1,6
Maximum speed (rpm)
5.600
Maximum diameter (mm)
160
WORKABLE SIDES
Number of faces (top, side, bottom)
1 + 2 + 1
WORKPIECE LOCKING
Automatic fixed clamping system before machining area
Automatic fixed clamping system after machining area
Clamping system standard height 20 mm
Clamping system for profile adapted to profile system
MODES OF OPERATION
Screwing operation for reinforcement steel
Milling, drilling operations of the piece direct from the profiled bar
Hand held scanner for bar code
Rotary axis gripper
Blow-off devices per additional working unit
Tool package 16 units
SUPPORT BASE
Monolithic in electrowelded and standardised steel
UNLOADING UNIT
Unloading table with a pneumatic pusher for workpieces of up to 4000 mm
Belt magazine unloading depth (mm)
1.900
ELECTRIC CABINET COOLING
Electrical cabinet with air conditioner for operating temperatures < 45 °C
Electrical panel and CN conditioner for operating temperatures < 50°C
Included Available
