GLS 192 B
Pneumatic V-cutting saw for 2x45° angle cutting, equipped with special blades arranged one above the other for simultaneous undercutting of the glazing bead web. The machine is equipped as standard with pneumatic, vertical special clamping device which enables the simultaneous processing of glazing beads.
Options:
• Roller conveyor with stand
• Stop and measuring systems
• Profile counterblocks
• Blades
WORK AREA
Maximum cutting width (mm)
130
Maximum cutting height (mm)
44,5
Minimum profile length (mm)
240
DIMENSION AND WEIGHT
Length (mm)
460
Depth (mm)
1.040
Height (mm)
1.120
Weight (kg)
140
MOTORS
Three-phase asynchronous motors
2
Motors power (kW)
2 x 0,9
MODES OF OPERATION
Vertical clamps
2
Simultaneous cutting of 2 glazing beads
Automatic cutting sequence
Operation by foot switch
CUTTING DIAGRAM
TOOLS
Blades type
HSS
Blade diameter (mm)
200
Blade diameter (45° beveled) (mm)
98
Blade bore (mm)
32
Blade speed - 50 Hz motor (r.p.m.)
2.800
Blade speed - 60 Hz motor (r.p.m.)
3.400
EQUIPMENT
Vertical clamping device
Glazing bead counterblock
Roller conveyor
Manual measuring systems
Roller conveyor / measuring system connecting plate
ELECTRICAL CONNECTION
Connected load (without suction) (kW)
1,9
Maximum backup fuse 240V 60Hz (without suction) (A)
16
Maximum backup fuse 400V 50Hz (without suction) (A)
10
PNEUMATIC CONNECTION
Pressure (bar)
7
Hose connection
DN10
Compressed air consumption (7 bar) per working cycle (without spraying) (l)
20
Included Available
Snap-in interchangeable counterblocks
The counterblocks are very easy to change: a snap-in mechanism enables them to be changed without having to use any other tools.
Workpiece clamping system
The workpiece is clamped from above by means of clamps; thin profiles can also be clamped by GLS 192 from the bottom to avoid the risk of deformation and to ensure a greater cutting precision.
Cutting module
Glass stopper cuts are made by 2 cutting units, one set at 45° and the other at 135°. Each cutting unit is made up of 2 blades: the first actually cuts the glass stopper and the second, which has a smaller diameter, makes the cut in the glass stopper that is to house the gasket. This machine configuration enables 2 profiles to be inserted in the counterblocks so that 2 glass stoppers can be cut at the same time.
Connection to roller conveyors and stop gauges
Beside the cutting area there is a steel support for connecting the machine to an infeed roller conveyor or a stop gauge that ensures high positioning precision while cutting the glass stopper.
