> Downstream centre for reinforcement screw driving, drilling and routing cut-to-length profiles for window, door and curtain wall manufacturing with and without steel reinforcement

> Portal design for high profile cross-sections and processoptimised throughput

> Work sequence as needed, either from the left towards the right or the reverse

> Lifting function for gap-free loading of the feed magazine
> Profiles are guided on rollers to ensure gentle treatment of the profile and protective film as well as completion of long machining operations without re-clamping

> Internal gripper avoids damaging the profiles

> Integrated measuring sensors for part length monitoring

> Outfeed for parts via discharge table
> Industrial PC with Windows operating system
> Barcode scanner



Options
> Additional reinforcement screwdriver units for multiple types of screws

> Upending unit for profiles that are difficult to clamp

 

 

Technical data arrow_drop_down
AXIS TRAVEL 
Y AXIS (transversal) (mm)
370
Z AXIS (vertical) (mm)
270
X AXIS (bar positioning) (mm)
5620
Y1 AXIS (gripper transversal positioning) (mm)
130
Z1 AXIS (gripper vertical positioning) (mm)
145
A1 AXIS (pliers rotation)
280°
WORKABLE SIDES 
Number of faces (top, side, bottom)
1 + 2 + 1
LOADING UNIT: PROFILE POSITIONING 
Workpiece reference stop near the working unit
 
Maximum loadable length (mm)
4000
Belt loading magazine for 14 profiles with a length varying from 350 mm to 4.000 mm, max. weight 40 kg
 
Loading feeder with 2 controlled axes for workpieces of up to 4,000 mm with gripper
 
Electronically controlled 0 - 180° collet rotation (C1 axis)
 
Minimum machinable profile section W x H (mm)
30 x 30
Maximum profile height W x H (mm)
130 x 205
WORKPIECE LOCKING 
Automatic fixed clamping system before machining area
 
Automatic fixed clamping system after machining area
 
Clamping system standard, high 20 mm
 
Clamping system for profile adapted to profile system
 
FUNCTIONS 
Screwing operation for reinforcement steel
 
Milling, drilling operations of the piece direct from the profiled bar
 
Hand held scanner for bar code
 
Rotary axis gripper
 
Blow-off devices per aditional working unit
 
Tool package 16 units
 
SUPPORT BASE 
Monolithic in electrowelded and standardised steel
 
UNLOADING UNIT: 
Unloading table with a pneumatic pusher for workpieces of up to 4000 mm
 
Belt magazine unloading depth (mm)
1900
ELECTRIC CABINET COOLING 
Electrical cabinet with air conditioner for operating temperature < 45 °C
 
Electrical panel and CN conditioner for operating temperatures < 50°C
 
ELECTROSPINDLES FOR PVC MILLING (MANUAL CHANGE) 
Maximum power in S6 (kW)
0,75
Maximum speed (rpm)
16300
Maximum diameter (mm)
12
ELECTROSPINDLES FOR STEEL DRILLING (MANUAL CHANGE) 
Maximum power in S6 (kW)
1,2
Maximum speed (rpm)
2456
Maximum diameter (mm)
16
ELECTROSPINDLES FOR HANDLE DRILLING (MANUAL CHANGE) 
Maximum power in S6 (kW)
1,6
Maximum speed (rpm)
2456
Maximum diameter for 3-Spindels (mm max.)
12 / 14 / 12
ELECTROSPINDLES FOR SMALL DIAMETER PVC & STEEL (MANUAL CHANGE) OPTIONAL 
Maximum power in S6 (kW)
1,2
Maximum speed (rpm)
9820
Maximum diameter (mm)
12
ELECTROSPINDLES FOR END MILLING (MANUAL CHANGE) OPTIONAL 
Maximum power in S6 (kW)
1,6
Maximum speed (rpm)
5600
Maximum diameter (mm)
160
Included       
Avayable

Other Products